|
 |
 |
|
 |
Factory director: Cheng Yongle
Cell Phone: 13805706343
Tel: +86-571-63892198
Fax: +86-571-63893608
Bank: Lin'an Jincheng Yijin Credit Cooperative, Hangzhou,Zhejiang, China.
A/C: 867201000006433
Duty paragraph: 33012425405114X
Add.: Industrial Park, Zaoxi Town, Lin'an, Hangzhou, Zhejiang,China. |
|
 |
|
|
 |
 |
| Products/Environment Sound Wash-free Flux |
|
Environment Sound Wash-free Flux: the product is made from high-purity chemical materials and produced under strict quality control. It can effectively clean oxides and keep the solder side clean and wet. We have different types of fluxes available. |
RN802 Environment Sound Wash-free Flux
SPECIFICATION |
1.COMPOSOTION/INFORMATION ON INGREDIENTS |
| |
PROPERTIES |
SPECS
|
| 01 |
FLUX MODEL |
RN802 |
| 02 |
FLUX CLASSIFICATION |
L2N |
| 03 |
COPPER MIRROR TEST |
PASSED |
| 04 |
SOLID CONTENT % W/W |
1.0±0.5 |
| 05 |
APPEARANCE |
COLORLESS AND TRANSPARENT |
| 06 |
FLASH POINT °C |
18(65°F) |
| 07 |
SPECIFIC GRAVITY 20°C |
0.800±0.005 |
| 08 |
BOILING POINT °C |
82.5±2.0 |
| 09 |
TLV OF SOLVENT (PPM) |
400 |
| 10 |
PRE-HEAT (TESTED BY SOLDER)°C |
80-110 |
| 11 |
SPREAD FACTOR % |
>90 |
| 12 |
HALIDE CONTENT % IN SOLUTION |
NONE |
| 13 |
PH VALUE |
5.0±0.5 |
| 14 |
THINNER USED |
T-1003 |
| 15 |
INSULATION RESISTANCE Ω
|
1×1011 |
| 16 |
CORROSION TEST TO MIL-14256D
|
PASSDE |
| 17 |
APPLICATIONS
|
FOARMING, SOAKING, SPRAYING |
| 18 |
DWELL TIME
|
35(S) |
|
| 2.SPILL/LEAK PROCEDURES |
| SPILL PROCEDURE: |
WIPE CLEAN WITH DRY DLOYH AND WASH WATER |
| WASTE DISPOSAL METHODS: |
DISPOSE IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS |
|
3.REACTIVITY DATA |
| STABLITY: |
STANLE |
| CONDITIONS TO AVOID: |
KEEP IN COOL DRY PLACEAVOID SUNLIGHT AND EXTENSIVE HEAT |
| INCOMPATILITY (MATERALS TOAVOID): |
ACID OR ALKAINE XOLUTIONS, SATER, GRDASE, INORGANIC MATERIAL |
| HAZARDOUS DECOMPOSITION: |
OXIDANT |
| HAZARDOUS POLYMERIEATION: |
WILI NOT OCCUR |
|
4.
HEATB HAZARDS |
| MEDICAL CONDITIONS AGGRAVATED BY ESPOSURE: |
NONE KNOWN |
| EMERGENCY & FIRST AID PROCEDRES: |
1.FOR SKIN CONTACT, WASH WITH SOAP AND WATER
2.FOR EYE CONTACT, FLUSH WITH WATER |
|
5.
SPECIAL PROTECTION INFORMATION/CONTROL MEASURES |
| VENTLATION |
ADEQUATE ESHAUST VENTIL ATION AND WASH THOROUGHLY AFTER HANDLING |
| HYGIENIC WORK PRACTICES |
WEAR PROTECIVE EQUIPMENT AND WASH THOROUGHLY AFTER HANDLING |
| OPERATION PRECAUTIONS |
1.FLMMABLE, DO NOT USE NEAR STORAGE REGULATIONS & FIRE OR FLAM
2.USE WITH ADEQUAE VENTIL ATION, AVOID RPLINGED BRDATHING OF FAOPR
3.WASH THOROUGHLY AFTER HANDLING, AND DO NLT TAKE INTERNALLY
4.KEEP IUT OF THE REACH OF CHILDREN
5.KEEP TIGHTLY CLOSED AND AVOID DIRDCT SUNLIGHT AND EXTENSIVE HEAT |
* The technical parameters of this products are just for your reference. |
|
|
